Comparisons
Side-by-side comparisons of manufacturing routes and materials, from die against investment casting to wire EDM against milling.
Wire EDM vs Milling: When a Part Needs Each
When a part needs wire electrical discharge machining instead of milling: hardened material, sharp internal corners, thin sections and no cutting force.
ASME B16.5 vs HG 20592 Flange Standards
How ASME B16.5 and HG 20592 differ in sizing, pressure class and facing, and what to state on a drawing so a flange arrives to the standard you meant.
Aluminium vs Stainless Steel for Machined Parts
How aluminium and stainless steel differ once a part is being machined: cutting time, tool wear, stiffness, corrosion behaviour and finish, and which to specify.
Casting or Machining: 6 Questions That Decide Which Is Cheaper at Your Volume
Six questions that settle whether a part should be cast or machined, from geometry and alloy to tooling cost and the quantity where the crossover happens.
Domestic Machine Shop vs Overseas CNC Supplier for Custom Parts
A local machine shop and an overseas CNC supplier differ on lead time, unit cost, tolerance control and recourse. Which fits depends on volume and spec stability.
Die Casting vs Investment Casting for Custom Industrial Parts
Die casting and investment casting differ on tooling cost, alloy range, wall thickness and volume. Which one fits depends on your part and your quantity.